Category: Omega Seamaster Replica Watches

For decades, Faraday cages are the most reliable way to resist a powerful magnetic field. Omega has a different answer. Did it work in our tested Omega Replica Seamaster Aqua Terra> 15,000 gauss we found.

Made of soft iron inner shell, known as the Faraday cage, in the 20th century, the first 30 years to protect the Omega Replica Watches anti-magnetic. Today, the alloy used to make the balance spring ensures that the watch has sufficient resistance to magnetic properties to meet internationally recognized standards. This means that the watch can withstand a magnetic field of 4800 amps per meter, equal to six milliamperes. This is not a very strong field, especially when an ordinary household magnet usually produces 30 to 100 milliliters of magnetic field. These relatively weak protection is not enough, when the high-performance subwoofer installed in the car seat, the Omega Replica powerful magnetic field is usually generated by metal detectors, these metal detectors shield the airport passengers and dozens of other common equipment, Such as mobile phones, televisions, computers, tablets and induction furnaces. This can eventually produce a magnetic field of up to 1.5 Tesla, that is, 15,000 gauss.

A greater protection can be achieved by modifying the caliber: the adjustment part can be made of a material that can not be magnetized. For example, the Replica Watches developed 500,000 A / m of Ingenieur more than 20 years ago, and the escapement used a neodymium-iron-boronite that was completely resistant to neodymium and zirconium alloys to ensure a magnetic field of more than 6,000 gauss. This is what Omega says is the magnetic level of Cheap Replica Watches Seamaster Aqua Terra that can withstand 15,000 gauss. Silicon chip not only solved the watch company for hundreds of years of magnetic problems, but also for the watch manufacturing provides a new possibility. Now, designers can remove opaque soft iron cages, they can give the watch a sapphire bottom cover. They can also cut the window in the dial, display the date and other functions. A few years ago, when Omega Seamaster Replica Watches engineers began to develop anti-magnetic movements, these were the two features they wanted to have. They also pointed out that the watch should have the accuracy of the timer.

Omega and METAS, the Swiss Federal Institute of Metrology, held a joint press conference in Geneva to announce a new collaboration. Starting in 2015, Omega watches that are badged “Master Co-Axial” will be officially certified by METAS, using a new testing system. But what does this mean for Cheap Replica Watches, and for watch certification systems in general? Let’s take a look.

At the December Press Conference, held at the Cité du Temps in Geneva, Swatch Group CEO Nick Hayek was joined by Cheap Omega Replica President Stephen Urquhart and Christian Bock, the director of METAS, to discuss the new system.

The new certification represents a higher standard of accuracy. Omega watches will now be certified for not just consistent timekeeping but also for antimagnetism and water resistance. METAS, which describes itself as “the federal centre of competence for all issues related to measurement and for measuring equipment and measuring procedures,” will become the impartial regulating body to ensure that Omega’s manufacturing standards meet the brand’s promises. Going forward, all Omega Replica Watches calibers will be tested to meet certain standards. Each movement must continue to function when exposed to magnetic fields greater than 15,000 Gauss. Each finished watch must also continue to function when exposed to magnetic fields greater than 15,000 Gauss. The watch must keep consistent time, between 0 and +5 seconds/day, when tested at different temperatures and in different positions. Finally, each watch must be tested to ensure it achieves its stated power reserve and water resistance.

Omega’s move to develop a new certification system with METAS is significant for several reasons. For the last several years, Omega has been at the lead in developing new measures to protect watches from magnetic fields. With the Omega Seamaster Replica Watches Aqua Terra >15,000 Gauss, the brand has produced a watch movement that can keep time consistently even after exposure to some of the most intense magnetic fields a person is likely to encounter.

To pass the COSC test a watch movement must maintain accuracy between -4 and +6 seconds per day; however, a movement’s timekeeping can be affected during the casing-up process or when the rotor is affixed on an automatic – and all of this occurs after the COSC test has been completed. Since the new Omega Replica testing will be performed on both the movement and on the finished watch – and since it has a narrower allowance, not permitting the watch to lose seconds, only to gain – it should provide a higher standard than COSC. Omega will continue to certify its chronometers with COSC over the coming years, but the number of movements receiving COSC certification will decrease as more and more Master Co-Axial calibers receive the new METAS certification.

The owner of a certified Master Co-Axial Omega will be able to log onto a site using the watch’s warranty card. There, the specific results of the individual watch, as well as the testing parameters, will be readily available. At the press conference in December, Hayek and Urquhart were encouraging about the fact that any brand can contract with METAS for an impartial certification system. While Omega Replica Watches has provided its particular standards for the Master Co-Axial movements, other brands could follow suit. Hayek expressed hopes that this development may lead to more widespread innovation. “This would benefit the entire industry – not only in Switzerland but in China and Japan and in other countries with a history of innovative watchmaking,” Hayek said.